http://www.dmst.aueb.gr/dds/pubs/jrnl/2016-EMPSE-unix-history/html/unix-history.html
This is an HTML rendering of a working paper draft that led to a publication. The publication should always be cited in preference to this draft using the following reference:

This document is also available in PDF format.

The final publication is available at Springer via doi:10.1007/s10664-016-9445-5.

The document's metadata is available in BibTeX format.

Find the publication on Google Scholar

This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.

Diomidis Spinellis Publications

A Repository of Unix History and Evolution1

Diomidis Spinellis

Abstract

The history and evolution of the Unix operating system is made available as a revision management repository, covering the period from its inception in 1972 as a five thousand line kernel, to 2016 as a widely-used 27 million line system. The 1.1GB repository contains 496 thousand commits and 2,523 branch merges. The repository employs the commonly used Git version control system for its storage, and is hosted on the popular GitHub archive. It has been created by synthesizing with custom software 24 snapshots of systems developed at Bell Labs, the University of California at Berkeley, and the 386BSD team, two legacy repositories, and the modern repository of the open source FreeBSD system. In total, 973 individual contributors are identified, the early ones through primary research. The data set can be used for empirical research in software engineering, information systems, and software archaeology.

1  Introduction

The Unix operating system stands out as a major engineering breakthrough due to its exemplary design, its numerous technical contributions, its impact, its development model, and its widespread use [Gehani, 2003,pp. 27–29]. The design of the Unix programming environment has been characterized as one offering unusual simplicity, power, and elegance [McIlroy et al, 1978,Pike and Kernighan, 1984]. On the technical side, features that can be directly attributed to Unix or were popularized by it include [Ritchie and Thompson, 1978,Ritchie, 1978,Johnson and Ritchie, 1978]: A large community contributed software to Unix from its early days (; ). This community grew immensely over time and worked using what are now termed open source software development methods (; ). Unix and its intellectual descendants have also helped the spread of: Unix systems also form a large part of the modern internet infrastructure and the web.
The importance of Unix as an engineering artefact motivates the preservation of its development history, which can then be used for empirical research in software engineering, information systems, and software archeology.
The availability of Unix source code has changed over the years. In the 1970s, when Unix came of out Bell Labs and became widely known in the scientific community [Ritchie and Thompson, 1974], AT&T was still operating under a 1956 "consent decree" entered by Judge Thomas F. Meaney [Lewis, 1956]. This was the result of a complaint filed by the US Department of Justice Antitrust Division in 1949 against the Western Electric Company and AT&T, claiming that the companies were unlawfully restraining and monopolizing trade and commerce in violation of the Sherman Antitrust Act. Under the terms of the consent decree, Western Electric (a fully owned subsidiary of AT&T and 50% owner of Bell Labs) was prohibited from manufacturing non-telecommunications equipment, and AT&T (owner of the other 50% of Bell Labs) was forbidden to engage in business other than communication services [Lewis, 1956]. Consequently, AT&T could not market or license Unix for profit, and, therefore Unix was initially licensed royalty-free through simple letter agreements [Salus, 1994,p. 60]. Later however licenses became more intricate and restrictive, limiting the availability of its source code [Takahashi and Takamatsu, 2013], which was carefully guarded as a trade secret [Libes and Ressler, 1989,p. 20].
Luckily, important Unix material of historical importance has survived until today, often through magnetic tapes preserved in the hands of people realizing their significance. Also, key parts of the early Unix development, namely the systems running on the 16-bit PDP-11 and early versions of the 32-bit Unix (excluding System III, System V, and their successors), were released in 2002 by one of its right-holders (Caldera International) under a liberal license. The license, which covers the 16-bit Unix Editions 1–7 and 32-bit Unix 32V, allows the redistribution and use of the material in source and binary forms, with or without modification, subject to conditions similar to these of the original BSD license.
Combining these parts with software that was developed or released as open source software by the University of California at Berkeley and the FreeBSD Project provides coverage of the system's development over a period ranging from June 20th 1972 until today.
Curating and processing available source code snapshots as well as old and modern configuration management repositories allows the reconstruction of a new synthetic Git repository that combines under a single roof most of the available data. This repository documents in a digital form the detailed history and evolution of an important digital artefact over a period of 44 years. The contributions of the work presented here are: This work expands on a presentation [Gall et al, 2014] and a four-page conference paper [Spinellis, 2015] by including considerably more detailed information on the data and their generation process. The added material includes an overview of the code's licensing, the data set's key metrics (Table 1), a detailed description of the available software releases (Section 2.1), an expanded overview of data sources (Table 2) and available metadata (Section 2.2), GitHub integration (Section 2.3), known limitations (Section 2.4), the documentation of derived authorship data (Tables 3 and 4), details on the data import process and tools (Section 3.3), instructions for contributing to the project (Section 5), and a second example on using the data set (Figure 13).
The following sections describe the Unix history repository's structure and contents (Section 2), the way it was created (Section 3), how it can be used (Section 4), and how it can be extended (Section 5). The paper concludes with ideas for further work (Section 6).

2  Data Overview

Table 1: Key Repository Metrics of the Unix and Linux History Repositories
Metric Unix history Linux history
Start date 1972-06-20 1991-09-17
Start files 13 92
Start lines 4768 917,812
End files 63,049 51,396
End lines 27,388,943 21,525,436
Data size (.git) 1.1GB 1.0GB
Number of commits 495,622 611,735
Number of merges 2,523 48,821
Number of authors 973 18,465
Days with activity 13,004 5,126
The 1GB Unix history Git repository is made available for cloning on GitHub.2 Currently3 the repository contains 496 thousand commits and 2,523 merges from about 973 contributors (measured by counting unique email addresses). The contributors include 29 from the Bell Labs staff, 158 from Berkeley's Computer Systems Research Group (CSRG), 79 contributors of the 386BSD patch kit, and 691 from the FreeBSD Project. More metrics regarding the Unix history repository are listed in Table 1. For comparison purposes the table also includes details regarding the Linux kernel history repository.4 The Unix history repository reported here differs from the Linux one in three ways: first it covers a significantly longer timespan, second after 1974 it contains code of a complete system (kernel and tools) rather than only a kernel, and third it represents the work of four diverse communities.

2.1  Available Operating System Releases

timeline.png
Figure 1: Timeline of releases in the repository
The repository starts its life at a tag identified as Epoch, which contains only licensing information and its modern README file. Various tag and branch names identify points of significance. A timeline of these releases based on their repository timestamps is depicted in Figure 1.
The Research-VX tags correspond to six so-called research editions of Unix that came out of Bell Labs. These start with Research-V1 (4768 lines of PDP-11 assembly) and end with Research-V7 (1820 mostly C files, 324kLOC mdash; lines of code). Following tradition, the numbers of these releases correspond to the edition of the manual [Libes and Ressler, 1989,p. 5]. For example, Research-V7 is variously called 7th Edition or Version 7 Unix.
unix72-p1.png unix72-p2.png
Figure 2: Representative scanned pages from the 1st Edition Unix
The 1st Edition (November 3, 19715Research-V1) contains only the kernel; the 60 user commands that came with it [Salus, 1994,p. 41] are no longer available. Even the kernel, written in PDP-11 assembly language, has not survived in electronic form. It was derived from a group effort that took a scanned June 1972 280-page printout of 1st Edition UNIX source code and documentation [Bashkow, 1972], and restored it to an incomplete but running system [Toomey, 2010]. Two representative pages of the printout are shown in Figure 2.
The next four editions are also only partially available.
The 6th Edition (May 1975 — Research-V6), is the first that appears in the repository in complete form, and the first that became widely available outside Bell Labs through licenses to commercial and government users. It was also the last bearing the names of Thompson and Ritchie on the manuals' title page. The 6th Edition is the one John Lions used for teaching two operating systems courses at the University of New South Wales in Australia. In 1977 Lions produced a booklet with an indexed 9073-line listing of the entire Unix kernel with an equal amount of commentary explaining its structure [Lions, 1996]. Although this was initially sold by mail order, a year afterwards it was no longer available [Salus, 1994,p. 130]. Nevertheless, for the next two decades it circulated as multiple-generation samizdat photocopies [Lions, 1996,p. ix], until in late 1995 the lawyers of Santa Cruz Operation, Inc. gave permission for its official publication.
The 7th Edition (January 1979 — Research-V7), includes many new influential commands, such as awk [Aho et al, 1979], expr, find, lex [Lesk, 1975], lint [Johnson, 1977], m4 [Kernighan and Ritchie, 1979], make [Feldman, 1979], refer [Lesk, 1979a], sed [McMahon, 1979], tar, uucp [Nowitz and Lesk, 1979], and the Bourne shell [Bourne, 1979,Bourne, 1978]. It also supports larger file systems and more user accounts. It is the version that was widely ported to other architectures.
Unix 32V (or 32/V — tagged Bell-32V) is the port of the 7th Edition Unix to the DEC/VAX architecture. It was created by John Raiser and Tom London, managed by Charlier Roberts, at Bell Labs in Holmdel in 1978. There seem to be two reasons why the port was not implemented by the original team. First, DEC's refusal to support Unix, favouring VMS instead, and, second, the complexity of the VAX instruction set, which apparently went against the values of the Unix patriarchs [Salus, 1994,p. 154]. The port took about three months to complete by treating the VAX as a large PDP-11 — keeping the existing swapping mechanism and ignoring the VAX's hardware paging capability [Libes and Ressler, 1989,p. 12]. In the fall of 1978 Bell-32V was sent to the University of California at Berkeley under a "special research agreement" [Salus, 1994,p. 154].
BSD-X tags correspond to 15 snapshots released from Berkeley. Their contents are summarized in the following paragraphs, based on published descriptions (; ; ) and the manual examination of their contents. The first Berkeley Software Distribution (BSD) (tagged BSD-1), released in early 1978, contained the Unix Pascal System the ex line editor, and a number of tools. The Second Berkeley Software Distribution (2BSD, tagged BSD-2), included the full-screen editor vi, the associated terminal capability database and management library termcap, and many more tools, such as the csh shell. The 3BSD release (tagged BSD-3), released in late 1979, extended Unix 32V with support for virtual memory [Babaõglu and Joy, 1981] and the 2BSD additions. Subsequent releases [Salus, 1994,pp. 164–167] included in the repository are marked with the following tags.
386BSD-X tags correspond to 386/BSD: version 0.0 (March 1992 — tagged 386BSD-0.0) and version 0.1 (July 1992 — tagged 386BSD-0.1). This was a derivative of the BSD Networking 2 Release targeting the Intel 386 architecture, developed by Lynne and William Jolitz, who wrote the six missing kernel files. A description of this system was published as a series of 18 articles in the Dr. Dobb's Journal [Jolitz and Jolitz, 1991].
The 386BSD-0.1-patchkit branch contains 171 commits associated with patches made to 386BSD 0.1 by a group of volunteers from mid-1992 to mid-1993. Patches contain their changes in Unix "context diff" format, and can therefore be applied automatically to the 386BSD distribution. Each patch is accompanied by a metadata file listing its title, author, description, and prerequisites.
FreeBSD-release/X tags and branches mark 69 releases derived from the FreeBSD Project. The names of tags and branches to be imported are obtained by excluding from the corresponding FreeBSD set, names matching one of the following patterns: projects/, user/, master, or svn_head. The FreeBSD Project started in early 1993 to address difficulties in maintaining 386/BSD through patches and working with its author to secure the future of 386/BSD [FreeBSD, 2015]. The focus of the project was to support the PC architecture appealing to a large, not necessarily highly technically sophisticated audience [McKusick and Neville-Neil, 2004,p. 11]. For legal reasons associated with the settlement of the USL case, while versions up to 1.1.5.1 were derived from the BSD Networking 2 Release, later ones were derived from the 4.4BSD-Lite Release 2 with 386/BSD additions. Two other BSD Unix descendants that could have been imported in the place of FreeBSD or in parallel with it are NetBSD and OpenBSD. FreeBSD was chosen, because it appears to be more popular that the other two as measured by the results obtained by Google search (17 million results for FreeBSD, 366 thousand results for OpenBSD, and 350 thousand results for NetBSD).
All branches with a -Snapshot-Development suffix denote commits that have been synthesized from a time-ordered sequence of a snapshot's files, while tags with a -VCS-Development suffix mark the point along an imported version control history branch where a particular release occurred.

2.2  Available Metadata

The repository's history includes commits from the earliest days of the system's development, such as the ones listed in Figure 3. Commits that have been synthesized from snapshots and author-to-file maps, rather than imported from other revision control systems, can be recognized by the "Synthetic commit" phrase that appears in the commit's comment. Such commit comments follow exactly the preceding format, identifying the snapshot from which the commit was synthesized (four Research Editions in this case) and the file corresponding to the commit's time stamp.
commit c4b1db0397c78e91b554e3edff3350a8c80781b1
Author: Ken Thompson <ken@research.uucp>
Date:   Mon May 7 01:23:11 1979 -0500

    Research V7 development
    Work on file usr/sys/sys/nami.c

    Synthesized-from: v7
commit 08d62191ab22882194e5f7004b3c00fb39d99193
Author: Ken Thompson <ken@research.uucp>
Date:   Fri Jul 18 04:09:14 1975 -0500

    Research V6 development
    Work on file usr/sys/ken/nami.c

    Synthesized-from: v6
commit 90798d6e3caec237bab95d22f0650047c3e9d431
Author: Ken Thompson <ken@research.uucp>
Date:   Thu Jan 2 19:25:11 1975 -0500

    Research V5 development
    Work on file usr/sys/ken/nami.c

    Synthesized-from: v5
commit a8c0fddc39968d4669a1f75a5121b4acd8f9c699
Author: Ken Thompson <ken@research.uucp>
Date:   Thu Aug 30 19:30:51 1973 -0500

    Research V3 development
    Work on file sys/ken/nami.c

    Synthesized-from: v3

Figure 3: A log of file changes across Research Unix releases
Note that the commits derived from snapshot data are timestamped with the modification time of each file in the snapshot (see Figure 3). This means that they represent only the file's final change and state in the development of the given release. Furthermore, the timestamp may be incorrect in cases where the file's modification time was changed after it was last written by its author. This is almost certainly the case in the very early Unix Research Editions.
Merges between releases that happened along the system's evolution, such as the development of 3BSD from 2BSD and Unix 32/V, are also correctly represented in the Git repository as graph nodes with two parents (see Figure 8).
78a8403693 usr/sys/ken/pipe.c     (Ken Thompson 1975-07-17 10:33:37 -0500  48) 		iput(ip);
78a8403693 usr/sys/ken/pipe.c     (Ken Thompson 1975-07-17 10:33:37 -0500  49) 		return;
78a8403693 usr/sys/ken/pipe.c     (Ken Thompson 1975-07-17 10:33:37 -0500  50) 	}
9dd2619e6d usr/sys/sys/pipe.c     (Ken Thompson 1979-01-10 15:19:35 -0500  51) 	u.u_r.r_val2 = u.u_r.r_val1;
9dd2619e6d usr/sys/sys/pipe.c     (Ken Thompson 1979-01-10 15:19:35 -0500  52) 	u.u_r.r_val1 = r;
2c5a749b29 usr/sys/ken/pipe.c     (Ken Thompson 1974-11-26 18:13:21 -0500  53) 	wf->f_flag = FWRITE|FPIPE;
2c5a749b29 usr/sys/ken/pipe.c     (Ken Thompson 1974-11-26 18:13:21 -0500  54) 	wf->f_inode = ip;
2c5a749b29 usr/sys/ken/pipe.c     (Ken Thompson 1974-11-26 18:13:21 -0500  55) 	rf->f_flag = FREAD|FPIPE;
2c5a749b29 usr/sys/ken/pipe.c     (Ken Thompson 1974-11-26 18:13:21 -0500  56) 	rf->f_inode = ip;
2c5a749b29 usr/sys/ken/pipe.c     (Ken Thompson 1974-11-26 18:13:21 -0500  57) 	ip->i_count = 2;
9dd2619e6d usr/sys/sys/pipe.c     (Ken Thompson 1979-01-10 15:19:35 -0500  58) 	ip->i_mode = IFREG;
7fc472a9e2 usr/src/sys/sys/pipe.c (Bill Joy     1980-11-09 08:01:07 -0800  59) 	ip->i_flag = IACC|IUPD|ICHG|IPIPE;

Figure 4: Identification in a single file of commits spanning multiple snapshots
More importantly, the repository is constructed in a way that allows git blame, which annotates source code lines with the version, date, and author associated with their first appearance, to produce the expected code provenance results. For example, checking out the BSD-4 tag, and running git blame -M -M -C -C on the kernel's pipe.c file will show lines spanning the 5th, 6th, and the 7th Research Edition developed at Bell Labs, as well as 4BSD developed at Berkeley (see Figure 4). These lines are derived from snapshot files (probably) written by Ken Thompson in 1974, 1975, and 1979, and by Bill Joy in 1980. This feature allows the automatic (though computationally expensive) detection of the code's provenance at any point of time. Similarly, the git log command can also trace file changes across successive Unix releases. An example can be seen in Figure 3, which was obtained by running git log -follow -M20 -C20 ./usr/sys/sys/nami.c on the checked out version of Research-V7.
provenance.png
Figure 5: Code growth and provenance across representative Unix releases.
lib/libc/gen/timezone.c         (Ed Schouten        2009-12-05 19:31:38 +0000 107) _tztab(int zone, int dst)
lib/libc/gen/timezone.c         (Rodney Grimes      1994-05-27 05:00:24 +0000 108) {
lib/libc/gen/timezone.c         (David E. O'Brien   2002-02-01 01:08:48 +0000 109)     struct zone     *zp;
lib/libc/gen/timezone.c         (David E. O'Brien   2002-02-01 01:08:48 +0000 110)     char    sign;
usr/src/lib/libc/gen/timezone.c (Bill Joy           1980-12-22 00:40:25 -0800 111)
usr/src/lib/libc/gen/timezone.c (Keith Bostic       1987-03-28 19:27:07 -0800 112)     for (zp = zonetab; zp->offset != -1;++zp)
                                                                                                             /* static tables */
usr/src/lib/libc/gen/timezone.c (Keith Bostic       1987-03-28 19:27:07 -0800 113)             if (zp->offset == zone) {
usr/src/libc/gen/timezone.c     (Dennis Ritchie     1979-01-10 14:58:45 -0500 114)                     if (dst && zp->dlzone)
usr/src/libc/gen/timezone.c     (Dennis Ritchie     1979-01-10 14:58:45 -0500 115)                             return(zp->dlzone);
usr/src/libc/gen/timezone.c     (Dennis Ritchie     1979-01-10 14:58:45 -0500 116)                     if (!dst && zp->stdzone)
usr/src/libc/gen/timezone.c     (Dennis Ritchie     1979-01-10 14:58:45 -0500 117)                             return(zp->stdzone);
usr/src/libc/gen/timezone.c     (Dennis Ritchie     1979-01-10 14:58:45 -0500 118)             }

Figure 6: The oldest surviving code in a 2016 version of FreeBSD Unix (lines 114–118).
As can be seen in Figure 5, a modern version of Unix (FreeBSD 10.2) still contains visible chunks of code from 4.3BSD, 4.3BSD Net/2, and all releases starting from FreeBSD 2.0. Interestingly, the Figure also shows that code developed during the 18-month dash to create an open source operating system out of the code released by Berkeley — 386BSD and FreeBSD 1.0 — does not seem to have survived.
The oldest significant code in the 2016 version of FreeBSD (10.2.0) appears to be an 18-line sequence in the C library file timezone.c. This was found by running the git blame command on it, which takes a bit more than two minutes to complete on a modern PC. The output (see Figure 6) includes code with changes spanning three decades. The oldest part can also be found in the 7th Edition Unix file with the same name and a time stamp of January 10th, 1979 — 36 years ago.

2.3  GitHub Integration

github.png
Figure 7: Integration of the repository with current GitHub accounts.
All commits included in the repository are associated with a single internet-standard [Resnick, 2008] email address that can be linked to GitHub accounts. Old-style UCCP addresses (e.g. ) are expressed in domain-name format (). Where more contributors are associated with a commit these are identified through Co-Authored-By: header-like lines added to the commit's comment. For example, most unaccounted early commits are attributed as instructed in the following quote [Ritchie, 1984].
The reader will not, on the average, go far wrong if he reads each occurrence of `we' with unclear antecedent as `Thompson, with some assistance from me.'
A simple web-based search engine and a process outlined in the project's README file, allow current GitHub users to associate their past commits with their current GitHub account through the email address listed in the commit. This can be seen in Figure 7: S. R. Bourne's commit (top) is not associated with a GitHub account, Ken Thompson's commit (second from the bottom) is associated with his current GitHub account, while the commits by Dennis Ritchie and J. F. Ossanna are associated with posthumously-created in memoriam accounts. Through direct emails and a message posted on The Unix Heritage Society mailing list past authors were encouraged to link their current GitHub accounts to their past commits. Although some have responded enthusiastically, the response was not overwhelming.

2.4  Known Limitations

Researchers using the provided data set should note some limitations regarding its coverage and fidelity. Where applicable these are discussed in detail in other parts of this work.
Many of the data set's limitations are associated with releases that are imported through snapshots (depicted by square boxes in Figure 8). These are the following.
Other limitations apply to the data set as a whole.

3  Data Collection and Processing

The goal of the work reported here is to consolidate data concerning the history of Unix in a form that helps the study of the system's evolution, by entering them into a modern revision repository. This involves collecting the data, curating them, and synthesizing them into a single Git repository.
The software and data files that were developed as part of this project, are available online,7 and, with appropriate network, CPU, and disk resources, they can be used to recreate the repository from scratch.
branches.png
Figure 8: Imported Unix snapshots, repositories, and their mergers. (On the right: a model of the synthetic commits between any two snapshots.)

3.1  Primary Data

Table 2: Data Sources
Tag Data source(s)
Research-V1 http://www.tuhs.org/Archive/PDP-11/Distributions/research/Dennis_v1/svntree-20081216.tar.gz
Research-V3 http://www.tuhs.org/Archive/PDP-11/Distributions/research/Dennis_v3/nsys.tar.gz
Research-V4 http://www.tuhs.org/Archive/PDP-11/Distributions/research/Dennis_v4/v4man.tar.gz
Research-V5 http://www.tuhs.org/Archive/PDP-11/Distributions/research/Dennis_v5/v5root.tar.gz
Research-V6 http://www.tuhs.org/Archive/PDP-11/Distributions/research/Dennis_v6/v6root.tar.gz
http://www.tuhs.org/Archive/PDP-11/Distributions/research/Dennis_v6/v6src.tar.gz
http://www.tuhs.org/Archive/PDP-11/Distributions/research/Dennis_v6/v6doc.tar.gz
BSD-1 http://www.tuhs.org/Archive/PDP-11/Distributions/ucb/1bsd.tar.gz
BSD-2 http://www.tuhs.org/Archive/PDP-11/Distributions/ucb/2bsd.tar.gz
Research-V7 http://www.tuhs.org/Archive/PDP-11/Distributions/research/Henry_Spencer_v7/v7.tar.gz
http://www.tuhs.org/Archive/PDP-11/Distributions/research/Henry_Spencer_v7/v7.patches.tar.gz
Bell-32V http://www.tuhs.org/Archive/VAX/Distributions/32V/32v_usr.tar.gz
BSD-3 http://www.tuhs.org/Archive/4BSD/Distributions/3bsd.tar.gz
BSD-4 file://CSRG-CD-ROMs/cd1/4.0
BSD-4_1_snap file://CSRG-CD-ROMs/cd1/4.1.snap
BSD-4_1c_2 file://CSRG-CD-ROMs/cd1/4.1c.2
BSD-4_2 file://CSRG-CD-ROMs/cd1/4.2
BSD-4_3 file://CSRG-CD-ROMs/cd1/4.3
BSD-4_3_Tahoe file://CSRG-CD-ROMs/cd2/4.3tahoe
BSD-4_3_Net_1 file://CSRG-CD-ROMs/cd2/net.1
BSD-4_3_Reno file://CSRG-CD-ROMs/cd2/4.3reno
BSD-4_3_Net_2 file://CSRG-CD-ROMs/cd2/net.2
BSD-4_4 file://CSRG-CD-ROMs/cd3/4.4
BSD-4_4_Lite1 file://CSRG-CD-ROMs/cd2/4.4BSD-Lite1
BSD-4_4_Lite2 file://CSRG-CD-ROMs/cd3/4.4BSD-Lite2
BSD-SCCS file://CSRG-CD-ROMs/cd4
386BSD-0.0 http://www.oldlinux.org/Linux.old/distributions/386BSD/386bsd-0.0/floppies/3in/src/
386BSD-0.1 http://www.oldlinux.org/Linux.old/distributions/386BSD/0.1/386BSD/
386BSD-0.1-patchkit ftp://www.tuhs.org/BSD/386bsd-patchkits/
FreeBSD-release/1.0 http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/ISO-IMAGES/1.0/1.0-disc1.iso
FreeBSD-release/1.1 http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/ISO-IMAGES/FreeBSD-1.1-RELEASE/cd1.iso
FreeBSD-release/1.1.5 http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/ISO-IMAGES/FreeBSD-1.1.5.1/cd1.iso
FreeBSD-release/2... https://github.com/freebsd/freebsd
The project is based on three types of data (see Figure 8 and the corresponding data sources listed in Table 2). First, snapshots of early released versions, which were obtained from the Unix Heritage Society archive [Toomey, 2009], the CD-ROM images containing the full source archives of CSRG,8 the OldLinux site, and the FreeBSD archive. These data are represented in the Unix history repository as synthetic commits, based on manually-added and extracted metadata. Second, past and current repositories, namely the CSRG SCCS repository, the FreeBSD 1 CVS repository, and the Git mirror of modern FreeBSD development. These data were imported into the repository as commits matching the original ones. The last, and most labour intensive, source of data was primary research, which is discussed in the next section. Information regarding merges between source code bases was obtained from a BSD family tree maintained by the NetBSD project.9

3.2  Authorship

Table 3: Manually-Allocated Contributions in Research Unix Editions
Identifier Name Contributions
aho Alfred V. Aho awk, dbm, egrep, fgrep, libdbm
ark Andrew Koenig varargs
bsb Brenda S. Baker struct
bwk Brian W. Kernighan adv, awk, beg, beginners, ctut, ed, edtut, eqn, eqnchar, learn, m4, neqn, rat, ratfor, trofftut, uprog
cbh Charles B. Haley regen, setup, tar
csr C. S. Roberts tss
dan D. A. Nowitz uucp
dmr Dennis Ritchie a.out, ar, as, assembler, atan, bcd, c, cacm, cat, cc, cdb, check, chmod, chown, cmp, core, cp, ctime, ctour, date, db, dev, df, dir, dmr, dp, dsw, du, ed, exit, exp, f77, fc, fort, fptrap, getc, getty, glob, goto, hypot, if, init, iolib, iosys, istat, ld, libc, ln, login, ls, m4, man2, man3, man4, mesg, mkdir, mount, mv, nm, od, pr, ptx, putc, regen, rew, rf, rk, rm, rmdir, rp, secur, security, setup, sh, sin, sort, sqrt, strip, stty, su, switch, tp, tty, type, umount, unix, uprog, utmp, who, write, wtmp
doug Doug McIlroy diff, echo, graph, join, look, m6, sort, spell, spline, tmg
haight Dick Haight expr, find
jfm J. F. Maranzano adb
jfo Joe Ossanna azel, ed, getty, nroff, ov, roff, s7, stty, troff, wc
ken Ken Thompson ar, atan, atof, bas, bj, bproc, cacm, cal, cat, check, chess, chmod, chown, core, cp, dc, dd, df, dir, dli, dp, dsw, dtf, ed, exp, f77, fc, fed, form, fort, fptrap, getty, grep, hypot, implement, init, itoa, ken, libplot, ln, log, login, ls, mail, man, man2, man4, mesg, mkdir, moo, mount, mv, nlist, nm, od, password, plot, pr, qsort, rew, rf, rk, rm, rmdir, roff, rp, sa, sh, sin, sort, sqrt, stty, su, sum, switch, sync, sys, tabs, tp, ttt, tty, umount, uniq, unix, utmp, who, write, wtmp
lem Lee E. McMahon comm, cu, grep, qsort, sed
llc Lorinda Cherry bc, dc, deroff, eqn, eqnchar, fed, form, neqn
mel Michael E. Lesk iolib, learn, lex, ms, msmacros, refer, tbl, tmac, uucp
pjw Peter J. Weinberger awk, f77, libI77, libmp, mp
rhm Robert Morris atan, bc, crypt, dc, exp, factor, fed, form, libm, m6, man3, password, primes, sky, sqrt
schmidt Eric Schmidt lex
scj Stephen C. Johnson cc, lint, mip, pcc, porttour, yacc
sif S. I. Feldman f77, make
srb S. R. Bourne adb, sh, shell
xtp Greg Chesson mpx, mpxcall, mpxio, pk[01]
Table 4: Manually-Allocated Contributions in BSD Unix Releases
Identifier Name Contributions
arn Rich Newton spice
arnold Ken Arnold curses, fortune, fortunes, libcurses
cbh Charles B. Haley ex, eyacc, mkstr, pascal, pi, public, px
cohen Ellis Cohen where
cvw Chris Van Wyk ideal
dlw David Wasley libI77uc
dop Don O. Pederson spice
eric Eric Allman me, memacros, portlib, sendmail, trek, tset
erics Eric Shienbrood more
frodo T. J. Kowalski fsck
honey Peter Honeyman pathalias
hpk Howard Katseff box, crazy, froc, last, sdb, sess, syswatch, toc, watch
jeff Jeff Schriebman biorhythm, colrm, flt40, linerm, procp, repeat, strip
jfr John Reiser as
jkf John Foderaro lisp
ken Ken Thompson apl, pi, px
kurt Kurt A. Shoens fix, fixit, fleece, fmt, funny, lock, mail, Mail, pq, reset, rmtree, ucbmail, vpac
lem Lee E. McMahon gres
llc Lorinda Cherry diction
mark Mark Horton banner, chfn, curses, leave, libcurses, rewind, script, ul, w
mckusick Kirk McKusick gprof, num
mike Mike Tilson tmac, vcat
mja Mike Accetta enet, pty, tty_pty
ozalp Ozalp Babaoglu analyze, locore, vm, vmstat, vmunix
peter Peter B. Kessler gprof
presott David Presotto vgrind
rrh Robert R. Henry as
schmidt Eric Schmidt berknet, net, netcp, netlpr, netmail, netq, netrm
sif S. I. Feldman efl
sklower Keith Sklower arff, flcopy, libNS
tbl Tom London liszt
td Tom Duff tmac, vcat
toy Michael Toy 33, libretro, num, rogue, shutdown, termcap, termlib
tuck Richard Tuck arff, flcopy
wnj Bill Joy analyze, apropos, ashell, cat3a, chessclock, chownall, colcrt, collpr, cptree, cr3, csh, cshms, cxref, dates, diffdir, double, dribble, edit, ex, ex-1, expand, exrecover, exrefm, eyacc, fold, from, glob2, head, htmp, htmpg, htmps, iul, list, lntree, locore, ls, makeTtyn, man, manwhere, mkstr, msgs, nm, num, number, osethome, pascal, pascals, pcc, pi, pi0, pi1, pix, print, Print, puman, px, pxp, pxref, rout, see, sethome, sh, sidebyside, size, soelim, squash, ssp, strings, strip, termcap, termlib, tests, tra, transcribe, ttycap, ttycap2, Ttyn, ttytype, typeof, ulpr, vgrind, vi, vm, vmstat, vmunix, wc, whatis, whereis, whoami, whoison, xstr
x-br Bill Reeves tmac, vcat
x-clm Colin L. Mc Master ccat, compact, uncompact
x-dl Douglas Lanam apl
x-dw David Willcox indent
x-etc Earl T. Cohen finger
x-im Ivan Maltz ticktock
x-jp Juan Porcar locore, vm, vmunix
x-le Len Edmondson lastcomm
x-or Olivier Roubine dribble
x-rd R. Dowell spice
x-rh Ross Harvey apl
x-rt Robert Toxen tod
The release snapshots do not provide information regarding their ancestors and the contributors of each file. Therefore, these pieces of information had to be determined through primary research. The authorship information was mainly obtained: Precise details regarding the source of the authorship information are documented in the project's files that are used for mapping Unix source code files to their authors and the corresponding commit messages.
# 2. http://www.cs.bell-labs.com/who/doug/index.html
# "Text- and data-processing utilities:
# spell, diff, sort, join, graph, speak, etc."
usr/src/cmd/diff.*              doug
usr/src/cmd/graph\.c            doug
usr/src/cmd/join\.c             doug
usr/src/cmd/spell/.*            doug
bin/spell                       doug

# 3. [Morris] was also the author of the series of crypt programs
# that came with early Unix, including the final one distributed with the
# Seventh Edition
# http://cm.bell-labs.com/cm/cs/who/dmr/crypt.html
usr/man/man1/crypt\.1           rhm
usr/man/man3/crypt\.3           rhm
usr/src/cmd/crypt\.c            rhm
usr/src/libc/gen/crypt\.c       rhm

# 5. Volume 2 of the manual (supplementary documents)
# Based on the authors listed in each document
usr/doc/adb/.*                  jfm,srb
usr/doc/adv.ed/.*               bwk
usr/doc/assembler               dmr
usr/doc/awk                     aho,pjw,bwk

Figure 9: Example specifications of file authorship
The authorship information for major releases is stored in files under the project's author-path directory. These contain lines with a regular expressions for a file path followed by the identifier of the corresponding author (Figure 9). Multiple authors can also be specified. The regular expressions are processed sequentially, so that a catch-all expression at the end of the file can specify a release's default authors.
Listing 1: Retrieving authorship information from documentation files
# Location of the Volume 2 documentation
cd archive/v7/usr/doc

# Find all files
find . -type f  - 
# List those containing the .AU macro
xargs fgrep .AU  - 
# Create path regular expressions
sed -n 's/^\.\/\([^-\/:]*\)\([:/]\).*/\/usr\/doc\/\1\2\.*/pp'  - 
# Eliminate wildcard for single files
sed 's/:\.\*//;s/ //'  - 
# Remove duplicates
sort -u

# Find all files
find . -type f  - 
# List two lines of context around the .AU macro
xargs fgrep -A 2 .AU

./adb/tut:.AU "MH2F-207" "3816"
./adb/tut-J. F. Maranzano
./adb/tut:.AU "MH2C-512" 7419
./adb/tut-S. R. Bourne
./adb/tut-.AI
--
./adv.ed/ae0:.AU "MH 2C518" 6021
./adv.ed/ae0-Brian W. Kernighan
./adv.ed/ae0-.AI
--
./assembler:.AU
./assembler-Dennis M. Ritchie
./assembler-.AI
--
./awk:.AU "MH 2C-522" 4862
./awk-Alfred V. Aho
./awk:.AU "MH 2C-518" 6021
./awk-Brian W. Kernighan
./awk:.AU "MH 2C-514" 7214
./awk-Peter J. Weinberger
./awk-.AI

Figure 10: Author names as listed in Unix documentation files
As an example on how file authorship was collected and processed, consider the authors of the documentation files comprising Volume 2 of the Unix Programmer's Manual in the 7th Research Edition. These files contain the names of their authors using the troff markup macro .AU. The path regular expressions for the corresponding files were obtained through the shell commands shown in Listing 1 lines 4–13. The output were lines similar to what appears on the left column of Figure 9. Then, the author names were listed with the commands shown in lines 15–18 of Listing 1. The generated output, such as the one appearing in Figure 10, was then used to fill-in by hand the author identifiers appearing on the right column of Figure 9. The authorship could then be propagated to the corresponding source code and Volume 1 manual pages.
# Email address template
%A $@research.uucp

# Id (used in path maps):Full name:email
aho:Alfred V. Aho
bsb:Brenda S. Baker
bwk:Brian W. Kernighan
csr:C. S. Roberts
dan:D. A. Nowitz
dmr:Dennis Ritchie
doug:Doug McIlroy
jfm:J. F. Maranzano
jfo:Joe Ossanna
[...]
schmidt:Eric Schmidt:schmidt@ucbvax.Berkeley.EDU

Figure 11: Specifications of author details
To avoid repetition, a separate file with a .au suffix is used to map author identifiers into their names and emails (Figure 11). One such file has been created for every community associated with the system's evolution: Bell Labs (bell.au), Berkeley (berkeley.au), 386BSD(386bsd.au), and FreeBSD (freebsd.au). For the sake of authenticity, emails for the early Bell Labs releases are listed using the UUCP [Quarterman and Hoskins, 1986] top-level pseudo-domain, e.g. ken@research.uucp.
The FreeBSD author identifier map, required for importing the early CVS repository, was constructed by extracting the corresponding data from the project's modern Git repository, which includes the full names of modern committers. In addition, the Unix finger command was used on a computer hosting FreeBSD Project developers, to obtain the full names of another 60 contributors. In total the commented authorship files (897 rules) comprise 1215 lines, and there are another 988 lines mapping author identifiers to names.

3.3  Processing

The processing of the project's data sources has been codified into a 190-line Makefile. The processing involves five steps: data fetching, tool construction, data unpacking, data cleaning, and repository creation. The following paragraphs summarize how each step is performed.
Data fetching involves copying and cloning about 11GB of images, archives, and repositories from remote sites. Some of the snapshots used are available as compressed tar or cpio archives (sometimes split into multiple files), while others are available as (or can be converted into) CD-ROM images.
Under tool construction an archiver required for processing old PDP-11 archives on modern platforms is compiled from source. The archiver's code stems from 2.9BSD. It was subsequently modified to work on non-PDP-11 architectures.11 Further modifications introduced as part of the work reported here include changes to make it preserve the modification time of the extracted files and adjustments to allow its warning-free compilation under Linux.
The data unpacking of the archives is mainly performed using tar and cpio. In addition, three 6th Research Edition directories are combined into one and all 1BSD archives are unpacked using the old PDP-11 archiver. Furthermore, the 8 and 62 386BSD floppy disk images are combined into two separate files. Finally, all CD-ROM images are made accessible so that they can be processed as file systems. This is done by mounting them via a loop-back device, which makes their contents (read-only) accessible as regular files.
The data cleaning involves tasks required to bring the data into a state suitable for the repository import tools. These are:
Finally, the synthesis of the various data sources into the single Unix history Git repository is performed by two scripts: A Perl script to feed Git with data and a shell script to invoke it for each data set.
The 780-line Perl script (import-dir.pl) can export the (real or synthesized) commit history from a single data source (snapshot directory, SCCS repository, or Git repository) in the Git fast export format.
The script takes as input a number of obligatory and optional arguments. These are used to specify:
Listing 2: Example of generated Git fast import data
     1	# 315830189 ../archive/3bsd/usr/src/cmd/ex/ex_addr.c
     2	blob
     3	mark :3
     4	data 5190
     5	 /* Copyright (c) 1979 Regents of the University of California */
     6	 #include ëx.h"
     7	 #include ëx_re.h"
     8	 [...]
     9	
    10	# Start development commits from a clean slate
    11	commit refs/heads/BSD-3-Snapshot-Development
    12	mark :10
    13	author Bill Joy <wnj@ucbvax.Berkeley.EDU> 287674317 -0800
    14	committer Bill Joy <wnj@ucbvax.Berkeley.EDU> 287674317 -0800
    15	data 99
    16	Start development on BSD 3
    17	Create reference copy of all prior development files
    18	(Synthetic commit)
    19	merge Bell-32V
    20	merge BSD-2
    21	M 100644 1468bde18e292c07e5d30ecbd7fd2b91a60e4626 .ref-Bell-32V/usr/include/stat.h
    22	M 100644 1468bde18e292c07e5d30ecbd7fd2b91a60e4626 .ref-Bell-32V/usr/include/sys/stat.h
    23	M 100644 816685f1f60f44dfaed7e673294b9d07a12114e5 .ref-Bell-32V/usr/man/man2/open.2
    24	[...]
    25	
    26	# 315830189 ../archive/3bsd/usr/src/cmd/ex/ex_addr.c
    27	commit refs/heads/BSD-3-Snapshot-Development
    28	mark :13
    29	author Bill Joy <wnj@ucbvax.Berkeley.EDU> 315830189 -0800
    30	committer Bill Joy <wnj@ucbvax.Berkeley.EDU> 315830189 -0800
    31	data 75
    32	BSD 3 development
    33	Work on file usr/src/cmd/ex/ex_addr.c
    34	(Synthetic commit)
    35	M 100644 :3 usr/src/cmd/ex/ex_addr.c
    36	[...]
    37	
    38	# Release
    39	commit refs/heads/BSD-Release
    40	mark :3700
    41	author Bill Joy <wnj@ucbvax.Berkeley.EDU> 315928541 -0800
    42	committer Bill Joy <wnj@ucbvax.Berkeley.EDU> 315928541 -0800
    43	data 78
    44	BSD 3 release
    45	Snapshot of the completed development branch
    46	(Synthetic commit)
    47	from :3699
    48	merge Bell-32V
    49	merge BSD-2
    50	D .ref-Bell-32V
    51	D .ref-BSD-2
    52	
    53	tag BSD-3
    54	from :3700
    55	tagger Bill Joy <wnj@ucbvax.Berkeley.EDU> 315928541 -0800
    56	data 91
    57	Tagged 3 release snapshot of BSD with 3
    58	Source directory: ../archive/3bsd
    59	(Synthetic tag)
    60	
    61	done
The command produces output in the so-called Git fast import format; a simple text-based stream format that many Git tools use to import and export data. An excerpt of this format can be seen in Listing 2, though its contents will be explained later.
An interesting part of the repository representation is how snapshots are imported and linked together in a way that allows git blame to identify old code in newer file versions. Snapshots are imported into the repository as sequential commits based on the time stamp of each file. When all files have been imported, the repository is tagged with the name of the corresponding release. At that point these files could be deleted, and the import of the next snapshot could begin. Note that the git blame command works by traversing backwards a repository's history, and using heuristics to detect code moves and copies within or across files. Consequently, deleted snapshot files would create a discontinuity between snapshots, and prevent the tracing of code between them.
Instead, before the next snapshot is imported, all the files of the preceding snapshot are moved into a hidden reference look-aside directory named .ref. (See the expanded synthetic commit series appearing on the right of Figure 8.) They remain there, until all files of the next snapshot have been imported, at which point they are deleted. Because every file in the .ref directory matches exactly an original file, git blame can determine how source code moves from one version to the next via the .ref file, without ever displaying the .ref file. To further help the detection of code provenance, and to increase the representation's realism, each release is represented as a merge between the branch with the incremental file additions (-Development) and the preceding release.
The small example of the Git fast import data seen in Listing 2 demonstrates the concepts described in the preceding paragraphs. The data stream begins with the contents of files that will be stored in the repository. These are specified using the blob command (lines 1–8). For debugging purposes the name and timestamp of the file from which the data were taken are first listed as a # line comment (line 1). The embedded mark command (line 3) associates the number 3 with the contents. These are specified through the data command (line 4). Its argument specifies the number of bytes supplied, which follow after a newline (e.g. lines 5–8).
Following the definitions of data elements come the commits associated with the import in the BSD-3-Snapshot-Development branch. The first commit (lines 10–24) creates a reference copy of the previous snapshot's files by moving them to a hidden directory (.ref-Bell-32V) by means of the M — filemodify command (lines 21–24). This changes the path of the old blob object identified through its SHA-1 hash to the one specified. The number 100644 (an octal representation similar to the Unix file mode) specifies that this is a normal (non-executable) file. The associated branch is given as an argument to the commit command (line 11). The snapshot being imported (in this case BSD-3) is identified as a merge of two preceding snapshots (Bell-32V and BSD-2) using the merge command (lines 19–20). The name and email associated with the commit's author and committer and the corresponding timestamps (in seconds since 1970 and UTC offset) are given in lines 13–14, while the commit's message is specified with a data command in lines 15–18.
Then comes a series of commits that add files to the repository. The commits are ordered according to the timestamps of the corresponding files. The example listed in lines 26–36 creates the file ex_addr.c. This is again specified with an M — filemodify command, which now refers to the blob (3) with the file's contents. The branch, author, committer, file mode, and commit message are specified in the same way as in the previous commit.
The last commit in a snapshot import (lines 38–51) marks a logical point on the BSD-Release branch. This is defined as a merge between the last commit in the BSD-3-Snapshot-Development branch (marked as 3699 and identified with the from command in line 47) and the two preceding snapshots (Bell-32V and BSD-2 — lines 48–49). At this point two D — filedelete commands remove the refence file copies that were created at the beginning (lines 50–51).
Finally, a tag command (lines 53–59) associates a symbolic name with the release, and the done command (line 61) signals the stream's end.
A 620-line shell script (import.sh) creates the Git repository and calls the Perl script with appropriate arguments to import each one of the approximately 30 available historical data sources (see Table 2). As an example, consider the following (slightly simplified) invocation.
perl ../import-dir.pl $VERBOSE -m Bell-32V,BSD-2 \
  -c ../author-path/BSD-3 -n ../berkeley.au -r Bell-32V,BSD-2 \
  -i ../ignore/BSD-3 -u ../unmatched/BSD-3 $ARCHIVE/3bsd \
  BSD 3 -0800 |
git fast-import --stats --done --quiet
The preceding shell command runs the import script over the 3bsd snapshot to create version 3 of the BSD branch. This will appear as a merge between the tags Bell-32V and BSD-2, whose files will also be retained until all the snapshot's files have been imported. The file author-path/BSD-3 specifies the authorship of each file and berkeley.au the details of the authors. Files listed in ignore/BSD-3 will not be imported and files matched with a wildcard (.*) authorship pattern will be listed in unmatched/BSD-3. The command's output is piped into the git fast-import command to convert it into actual Git commits.
For a period in the 1980s, only a subset of the files developed at Berkeley were under SCCS version control. During that period the Unix history repository contains imports of both the SCCS commits, and the snapshots' incremental additions. At the point of each release, the SCCS commit with the nearest time stamp is found and is marked as a merge with the release's incremental import branch. These merges can be seen in the center of Figure 8.
The import shell script also inserts into all imported versions of Unix diverse licensing files and a file named README.md which, among other things, contains the Git SHA sum of the software that created the repository and a timestamp of the import process. Provided the data sources are not modified, this allows the Unix repository to be uniquely identified in a replicable fashion.
The shell script also runs 30 tests that compare the repository at specific tags against the corresponding data sources, verify the appearance and disappearance of look-aside directories, and look for regressions in the count of tree branches and merges and the output of git blame and git log.
Before pushing the created repository to GitHub, git is called to garbage-collect and compress the repository from its initial 6.1GB size down to the distributed 1.1GB.

4  Data Uses

The Unix history repository can be used for empirical research in software engineering, information systems, and software archeology. Through its unique uninterrupted coverage of a period of more than 40 years, it can inform work on software evolution and handovers across generations. With thousandfold increases in processing speed and million-fold increases in storage capacity during that time, the data set can also be used to study the co-evolution of software and hardware technology.
metrics.png
Figure 12: Code style evolution along Unix releases.
As one concrete example, Figure 12 depicts trend lines of some interesting code metrics along 36 major releases of Unix. It demonstrates the evolution of code style and programming language use over very long timescales. This evolution can be driven by software and hardware technology affordances and requirements, software construction theory, and even social forces. The Figure was obtained with R's local polynomial regression fitting function. The dates in the Figure have been calculated as the average date of all files appearing in a given release. As can be seen in it, over the past 40 years the mean length of identifiers has steadily increased from 4 characters to 7 and mean length of file names has increased from 6 characters to 11. We can also see less steady increases in the number of comments and decreases in the use of the goto statement, as well as the virtual disappearance of the register type modifier. Based on these observations made in an exploratory study [Spinellis et al, 2015] a follow-up work [Spinellis et al, 2016] used the Unix history repository to examine seven concrete hypotheses. By extracting, aggregating, and synthesizing metrics from 66 snapshots in the period covered by the repository it was found that over the years developers of the Unix operating system appear to have evolved their coding style in tandem with advancements in hardware technology, promoted modularity to tame rising complexity, adopted valuable new language features, allowed compilers to allocate registers on their behalf, and reached broad agreement regarding code formatting. The reported work also showed that many trends point toward increasing code quality through adherence to numerous programming guidelines, that some other trends indicate adoption that has reached maturity, and that in the area of code commenting progress appears to have stalled.
lifespan.png
Figure 13: Exponential decay of Unix source code.
As a second example, Figure 13 shows the distribution of minimum and maximum lifespan estimates of a line of code. The estimates were obtained as follows. First git blame (with -w -C -C -C parameters) was run on all (1.5 million) source code files of 71 Unix releases selected in the repository. This task used considerable computing resources: 9.9 core years CPU time, 3,815 cores, 7.6 TB RAM, and 588 GB of disk space. Its execution was made possible by running it, as a set of tasks scheduled through SLURM [Yoo et al, 2003], on a supercomputer (IBM NeXtScale nx360M5, Intel Xeon E5-2680v2 10C 2.8GHz, Infiniband FDR14, 8,520 cores, 170 TFLOP/s). The run associated, with each line of code of each release, a timestamp indicating the time the line was last modified. By identifying the first release where a line of code stopped appearing, it was possible to estimate the minimum and maximum bounds of that line's lifespan in its initial form. The line was considered to "die" (it was removed or modified) sometime between the preceding release and the one where it stopped appearing. In total, minimum estimates were obtained for 117 million lines and maximum estimates for 89 million lines. (The minimum estimates also include lines that survived until the last available release.) Linear regression on the logarithm of the surviving lines of code l and their lifespan t indicates (R2 = 0.73; p = 2.2 ×10−16) that the code's decay matches the following exponential model.
l = e−0.26 ×t
Based on the lifespan's median value, we can bound the half-life of a line of code somewhere between 2.4 days and 9 years.
Apart from the preceding two concrete examples, many more areas of research present themselves. The move of the software's development from research labs, to academia, and to the open source community can be used to study the effects of organizational culture on software development. In that area an additional branch from Unix 32/V with System III, System v, and illumos could trace the evolution of Unix in corporate hands and its transition to another open source community.
The repository can also be used to study how notable individuals, such as Turing Award winners (Dennis Ritchie and Ken Thompson) and captains of the IT industry (Bill Joy and Eric Schmidt), actually programmed. Another phenomenon worthy of study concerns the longevity of code, either at the level of individual lines, or as complete systems that were at times distributed with Unix (Ingres, Lisp, Pascal, Ratfor, Snobol, TMG), as well as the factors that lead to code's survival or demise.
Finally, because the data set stresses Git, the underlying software repository storage technology, to its limits, it can be used to drive engineering progress in the field of revision management systems.

5  Contributing Extensions

The Unix history repository is managed as an open source project. The project can benefit from the addition of authorship information and entirely new data sources. Both can be contributed as changes to the repository containing the creation code; ideally as GitHub pull requests.
Adding authorship data for code that is imported via snapshots involves adding the author's login identifier, full name, and email (if different from the default for the corresponding community) in the author file associated with the repository: 386bsd.au, bell.au, berkeley.au, or freebsd.au. The fields are colon-separated; see Figure 11. Then, records must be added in the repository's authorship data file, which is located in the author-path directory. Each record consists of a regular expression that matches one or more files in the repository, followed by the login identifier of the files' author (see Figure 9). For example the following two lines identify Alfred Aho as the author of all files in the libdbm directory and Doug McIlroy as the author of the file join.c. (Note the escaped "."). Records are matched from top to the bottom of the file, so more specific patterns should be listed before more general ones.
usr/src/libdbm/.*               aho
usr/src/cmd/join\.c             doug

Both files allow comments starting with a "#" character. The associated comments and commit messages should clearly indicate the attribution's justification, e.g. a pointer to a publication or a timestamped excerpt of a personal communication. Following the change, the consistency of the added data should be verified by running import.sh -VI, the Unix history repository should be rebuilt, and the differences in the unmatched directory files should be closely examined to verify that they match the change made.
Adding a completely new release data source is more involved. First, note that the corresponding data should be legally available for further redistribution. For example, although various snapshots of System III and beyond seem to be floating around the internet, including them in the repository is not currently possible, because Caldera's license explicitly excludes them. In brief, the steps required are the following.

6  Further Work

Many things can be done to increase the repository's faithfulness and usefulness. Given that the build process is shared as open source code, it is easy to contribute additions and fixes through GitHub pull requests. The most useful community contribution would be to increase the coverage of imported snapshot files that are attributed to a specific author. Currently, about 81 thousand snapshot commits (10% out of a total of 496 thousand commits) are getting assigned an author through a default rule. Similarly, there are about 40 authors (primarily early FreeBSD ones, responsible for 4,974 commits - 1.6% of the total) for which only the identifier is known. Both are listed in the build repository's unmatched directory, and contributions are welcomed. Furthermore, the BSD SCCS and the FreeBSD CVS commits that share the same author and time-stamp can be coalesced into a single Git commit. Support can be added for importing the SCCS file comment fields, in order to bring into the repository the corresponding metadata. Finally, and most importantly, more branches of open source systems can be added, such as Plan 9 from Bell Labs, NetBSD OpenBSD, DragonFlyBSD, and illumos. Ideally, current right holders of other important historical Unix releases, such as System III, System V, NeXTSTEP, and SunOS, will release their systems under a license that would allow their incorporation into this repository for study.

Acknowledgements

The author thanks the many individuals who contributed, directly or indirectly, to the effort. John Cowan, Brian W. Kernighan, Larry McVoy, Doug McIlroy, Jeremy C. Reed, Aharon Robbins, and Marc Rochkind helped with Bell Labs login identifiers. Clem Cole, John Cowan, Era Eriksson, Mary Ann Horton, Warner Losh, Kirk McKusick, Jeremy C. Reed, Ingo Schwarze, Anatole Shaw, and Norman Wilson helped with BSD login identifiers and code authorship information. The historical and current material used in the repository was made available thanks to efforts by the FreeBSD Project, Lynne Greer Jolitz, William F. Jolitz, Kirk McKusick, and the Unix Heritage Society. The early Unix editions were released under an BSD-style license thanks to the efforts of Bill Broderick, Paul Hatch, Dion L. Johnson II, Ransom Love, and Warren Toomey. The BSD SCCS import code is based on work by H. Merijn Brand and Jonathan Gray. The newoldar program is a result of work by Brandon Creighton and Dan Frasnelli. The First Research Edition Unix was restored by Johan Beiser, Tim Bradshaw, Brantley Coile, Christian David, Alex Garbutt, Hellwig Geisse, Cyrille Lefevre, Ralph Logan, James Markevitch, Doug Merritt, Tim Newsham, Brad Parker, and Warren Toomey.

References

[Aho et al, 1979]
Aho AV, Kernighan BW, Weinberger PJ (1979) Awk-a pattern scanning and processing language. Software: Practice & Experience 9(4):267–280
[Babaõglu and Joy, 1981]
Babaõglu O, Joy W (1981) Converting a swap-based system to do paging in an architecture lacking page-referenced bits. In: Proceedings of the Eighth ACM Symposium on Operating Systems Principles, ACM, New York, NY, USA, SOSP '81, pp 78–86, DOI 10.1145/800216.806595
[Bashkow, 1972]
Bashkow TR (1972) Study of UNIX. Bell Laboratories memo MH-8234-TRB-mbh. Available online at http://bitsavers.informatik.uni-stuttgart.de/pdf/bellLabs/unix/PreliminaryUnixImplementationDocument_Jun72.pdf. Current September 2015
[Bird et al, 2006]
Bird C, Gourley A, Devanbu P, Gertz M, Swaminathan A (2006) Mining email social networks. In: Proceedings of the 2006 International Workshop on Mining Software Repositories, ACM, New York, NY, USA, MSR '06, pp 137–143, DOI 10.1145/1137983.1138016
[Bourne, 1978]
Bourne SR (1978) The UNIX shell. Bell System Technical Journal 56(6):1971–1990
[Bourne, 1979]
Bourne SR (1979) An introduction to the UNIX shell. In: [571979Unix Programmer's Manual]
[Dolotta et al, 1978]
Dolotta TA, Haight RC, Mashey JR (1978) The programmer's workbench. Bell System Technical Journal 56(6):2177–2200
[Feldman, 1979]
Feldman SI (1979) Make-a program for maintaining computer programs. Software: Practice & Experience 9(4):255–265
[FreeBSD, 2015]
FreeBSD (2015) FreeBSD Handbook. The FreeBSD Documentation Project, revision 47376 edn, available online https://www.freebsd.org/doc/handbook/index.html
[Gall et al, 2014]
Gall H, Menzies T, Williams L, Zimmermann T (2014) Software Development Analytics (Dagstuhl Seminar 14261). Dagstuhl Reports 4(6):64–83, DOI 10.4230/DagRep.4.6.64, URL http://drops.dagstuhl.de/opus/volltexte/2014/4763
[Gehani, 2003]
Gehani N (2003) Bell Labs: Life in the Crown Jewel. Silicon Press, Summit, NJ
[Johnson, 1975]
Johnson SC (1975) Yacc-yet another compiler-compiler. Computer Science Technical Report 32, Bell Laboratories, Murray Hill, NJ
[Johnson, 1977]
Johnson SC (1977) Lint, a C program checker. Computer Science Technical Report 65, Bell Laboratories, Murray Hill, NJ
[Johnson and Lesk, 1978]
Johnson SC, Lesk ME (1978) Language development tools. Bell System Technical Journal 56(6):2155–2176
[Johnson and Ritchie, 1978]
Johnson SC, Ritchie DM (1978) Portability of C programs and the UNIX system. The Bell System Technical Journal 57(6):2021–2048
[Jolitz and Jolitz, 1991]
Jolitz WF, Jolitz LG (1991) Porting UNIX to the 386: A practical approach. Designing a software specification. Dr Dobb's Journal 16(1)
[Kernighan et al, 1978]
Kernighan B, Lesk M, Ossanna JJ (1978) UNIX time-sharing system: Document preparation. Bell System Technical Journal 57(6):2115–2135
[Kernighan, 1982]
Kernighan BW (1982) A typesetter-independent TROFF. Computer Science Technical Report 97, Bell Laboratories, Murray Hill, NJ, URL http://cm.bell-labs.com/cm/cs/cstr/97.ps.gz, available online at http://cm.bell-labs.com/cm/cs/cstr/97.ps.gz
[Kernighan and Cherry, 1974]
Kernighan BW, Cherry LL (1974) A system for typesetting mathematics. Computer Science Technical Report 17, Bell Laboratories, Murray Hill, NJ
[Kernighan and Ritchie, 1979]
Kernighan BW, Ritchie DM (1979) The M4 macro processor. In: [571979Unix Programmer's Manual]
[aLesk, 1979]
Lesk M (1979a) Some applications of inverted indexes on the Unix system. In: [571979Unix Programmer's Manual]
[Lesk, 1975]
Lesk ME (1975) Lex-a lexical analyzer generator. Computer Science Technical Report 39, Bell Laboratories, Murray Hill, NJ
[bLesk, 1979]
Lesk ME (1979b) TBL-a program to format tables. In: [571979Unix Programmer's Manual]
[Lewis, 1956]
Lewis A (1956) AT&T settles antitrust case; shares patents. New York Times pp 1,16
[Libes and Ressler, 1989]
Libes D, Ressler S (1989) Life with UNIX. Prentice Hall, Englewood Cliffs, NJ
[Lions, 1996]
Lions J (1996) Lions' Commentary on Unix 6th Edition with Source Code. Annabooks, Poway, CA
[Mashey and Smith, 1976]
Mashey JR, Smith DW (1976) Documentation tools and techniques. In: Proceedings of the 2Nd International Conference on Software Engineering, IEEE Computer Society Press, Los Alamitos, CA, USA, ICSE '76, pp 177–181
[McIlroy et al, 1978]
McIlroy MD, Pinson EN, Tague BA (1978) UNIX time-sharing system: Foreword. The Bell System Technical Journal 57(6):1899–1904
[McKusick, 1999]
McKusick MK (1999) Twenty years of Berkeley Unix: From AT&T-owned to freely redistributable. In: DiBona C, Ockman S, Stone M (eds) Open Sources: Voices from the Open Source Revolution, O'Reilly, pp 31–46
[McKusick and Neville-Neil, 2004]
McKusick MK, Neville-Neil GV (2004) The Design and Implementation of the FreeBSD Operating System. Addison-Wesley, Reading, MA
[McMahon, 1979]
McMahon LE (1979) SED-a non-interactive text editor. In: [571979Unix Programmer's Manual]
[Nowitz and Lesk, 1979]
Nowitz DA, Lesk ME (1979) A dial-up network of UNIX systems. In: [571979Unix Programmer's Manual]
[Ossanna, 1979]
Ossanna JF (1979) NROFF/TROFF user's manual. In: [571979Unix Programmer's Manual]
[Pike and Kernighan, 1984]
Pike R, Kernighan BW (1984) Program design in the UNIX system environment. AT&T Bell Laboratories Technical Journal 63(8):1595–1606
[Quarterman and Hoskins, 1986]
Quarterman JS, Hoskins JC (1986) Notable computer networks. Communications of the ACM 29(10):932–971
[Raymond, 2003]
Raymond ES (2003) The Art of Unix Programming. Addison-Wesley
[Resnick, 2008]
Resnick P (2008) Internet Message Format. RFC 5322, RFC Editor, DOI 10.17487/RFC5322, URL http://www.rfc-editor.org/rfc/rfc5322.txt
[Ritchie, 1978]
Ritchie DM (1978) A retrospective. Bell System Technical Journal 56(6):1947–1969
[Ritchie, 1984]
Ritchie DM (1984) The evolution of the UNIX time-sharing system. AT&T Bell Laboratories Technical Journal 63(8):1577–1593
[Ritchie, 1993]
Ritchie DM (1993) The development of the C language. ACM SIGPLAN Notices 28(3):201–208, preprints of the History of Programming Languages Conference (HOPL-II)
[Ritchie and Thompson, 1974]
Ritchie DM, Thompson K (1974) The UNIX time-sharing system. Communications of the ACM 17(7):365–375
[Ritchie and Thompson, 1978]
Ritchie DM, Thompson K (1978) The UNIX time-sharing system. Bell System Technical Journal 57(6):1905–1929
[Ritchie et al, 1978]
Ritchie DM, Johnson SC, Lesk ME, Kernighan BW (1978) The C programming language. Bell System Technical Journal 57(6)
[Rochkind, 1975]
Rochkind MJ (1975) The source code control system. IEEE Transactions on Software Engineering SE-1(4):255–265
[Rosler, 1984]
Rosler L (1984) The evolution of C — past and future. Bell System Technical Journal 63(8)
[Salus, 1994]
Salus PH (1994) A Quarter Century of UNIX. Addison-Wesley, Boston, MA
[Spinellis, 2015]
Spinellis D (2015) A repository with 44 years of Unix evolution. In: MSR '15: Proceedings of the 12th Working Conference on Mining Software Repositories, IEEE, pp 462–465, DOI 10.1109/MSR.2015.6, URL http://www.dmst.aueb.gr/dds/pubs/conf/2015-MSR-Unix-History/html/Spi15c.html, best Data Showcase Award
[Spinellis et al, 2015]
Spinellis D, Louridas P, Kechagia M (2015) An exploratory study on the evolution of C programming in the Unix operating system. In: Wang Q, Ruhe G (eds) ESEM '15: 9th International Symposium on Empirical Software Engineering and Measurement, IEEE, pp 54–57, DOI 10.1109/ESEM.2015.7321190, URL http://www.dmst.aueb.gr/dds/pubs/conf/2015-ESEM-CodeStyle/html/SLK15.html
[Spinellis et al, 2016]
Spinellis D, Louridas P, Kechagia M (2016) The evolution of C programming practices: A study of the Unix operating system 1973–2015. In: Visser W, Williams L (eds) ICSE '16: Proceedings of the 38th International Conference on Software Engineering, Association for Computing Machinery, New York, DOI 10.1145/2884781.2884799, to appear
[Stevens, 1990]
Stevens WR (1990) UNIX Network Programming. Prentice Hall, Englewood Cliffs, NJ
[Stroustrup, 1984]
Stroustrup B (1984) Data abstraction in C. Bell System Technical Journal 63(8):1701–1732
[Stroustrup, 1994]
Stroustrup B (1994) The Design and Evolution of C++. Addison-Wesley, Boston, MA
[Takahashi and Takamatsu, 2013]
Takahashi N, Takamatsu T (2013) UNIX license makes Linux the last missing piece of the puzzle. Annals of Business Administrative Science 12:123–137
[Tichy, 1982]
Tichy WF (1982) Design, implementation, and evaluation of a revision control system,. In: Proceedings of the 6th International Conference on Software Engineering, IEEE
[Toomey, 2009]
Toomey W (2009) The restoration of early UNIX artifacts. In: Proceedings of the 2009 USENIX Annual Technical Conference, USENIX Association, Berkeley, CA, USA, USENIX'09, pp 20–26
[Toomey, 2010]
Toomey W (2010) First Edition Unix: Its creation and restoration. IEEE Annals of the History of Computing 32(3):74–82, DOI 10.1109/MAHC.2009.55
[Unix Programmer's Manual, 1979]
Unix Programmer's Manual (1979) UNIX Programmer's Manual. Volume 2-Supplementary Documents, seventh edn. Bell Telephone Laboratories, Murray Hill, NJ
[Wall and Schwartz, 1990]
Wall L, Schwartz RL (1990) Programming Perl. O'Reilly and Associates, Sebastopol, CA
[Yoo et al, 2003]
Yoo AB, Jette MA, Grondona M (2003) SLURM: Simple Linux utility for resource management. In: Feitelson D, Rudolph L, Schwiegelshohn U (eds) JSSPP 03: 9th International Workshop on Job Scheduling Strategies for Parallel Processing, Springer Berlin Heidelberg, Berlin, Heidelberg, pp 44–60, DOI 10.1007/10968987_3, lecture Notes in Computer Science Volume 2862

Footnotes:

1The work has been partially funded by the Research Centre of the Athens University of Economics and Business, under the Original Scientific Publications framework (project code EP-2279-01) and supported by computational time granted from the Greek Research & Technology Network (GRNET) in the National HPC facility — ARIS — under project ID PA003005-CDOLPOT. .
2https://github.com/dspinellis/unix-history-repo
3Updates may add or modify material. To ensure replicability the repository's users are encouraged to fork it on GitHub or archive it.
4https://archive.org/details/git-history-of-linux
5The dates provided here are given by Salus [1994],p. 43.
6http://www.tuhs.org/Archive/PDP-11/Distributions/research/1972_stuff/
7https://github.com/dspinellis/unix-history-make
8https://www.mckusick.com/csrg/
9http://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/misc/bsd-family-tree
10http://unix.stackexchange.com/questions/64025/who-are-these-bsd-unix-contributors
11ftp://ftp.tuhs.org.ua/PDP-11/Tools/Tapes/newoldar.c
12https://github.com/jonathangray/csrg-git-patches/